Capteur de détecteur de gaz

Measured Components: CH₄, CO₂, CₙHₘ*, Calorific Value

Measurement Principle: NDIR

Measured Components: CO/CO₂/CH₄/H₂/O₂/C₂H₂/C₂H₄/CₙHₘ*/Calorific Value

Measurement Principle: CO/CO₂/CH₄/C₂H₂/C₂H₄/CₙHₘ: NDIR; H₂: TCD; O₂: ECD

Measured Component: H₂S

Measurement Range: 0 - 25000ppm; Measurement range is selectable

Detection Principle: Light scattering principle / semiconductor

Detection Range: Smoke: 0 - 5000μg/m³; CO: 0 - 1000ppm; Temperature: -10 - 60°C

Detection Principle: Non - Dispersive Infrared Technology (NDIR)

Data Output: CO₂ Concentration (mmHg), End - Tidal CO₂, Inhaled CO₂, Respiratory Rate

Power supply voltage: 10.8V - 32V

Measurement range: 0 - 21% NOx measurement range: 0 - 2500ppm for NO & NO2, 1 < λ < ∞ (without NH3)

Measurement range: 0.98 - 1.02

Operating temperature: -40°C - 1000°C

Iron and Steel Metallurgy Industry: CO, CO₂, CH₄, C₂H₂, C₂H₄, C₂H₆, C₃H₈, O₂, H₂S...

Measuring Range: Minimum range: 0 - 10%, Maximum range: 0 - 100%

Applicable Media: Non - combustible gases such as air, flue gas, etc.

Applicable Pipeline Diameter: ≥ 0.3m

Dimensions: 92*92*25mm

Rated voltage: 12V

Component Range: O₂: 0 - 25%; COe: 0 - 10000ppm

Response Time: O₂: T90 ≤ 10s; COe: T90 ≤ 20s

Detection Principle: Dual - channel Non - Dispersive Infrared Spectral Absorption Technology (NDIR)

Detected Substance: CO₂

Negative Ion Generation Quantity: ≥3×10⁶ pcs/cm³

Residual Ozone Concentration: ≤0.05ppm

Measurement Range: 0 < PM Concentration < 25mg/m³

Accuracy: ±1.5mg/m (Range < 10mg/m³), ±15% (Range > 10mg/m³)

Measurement Range: 0 - 2500ppm

Fuel Compatibility: Gasoline / Diesel / e85

Heater Resistance: 9Ω ± 1.5Ω

Operating Voltage: DC 12V - 14V